Saving the Results

---

Different Formats

While we run various scans, we should always save the results. We can use these later to examine the differences between the different scanning methods we have used. Nmap can save the results in 3 different formats.

• Normal output (-oN) with the .nmap file extension

• Grepable output (-oG) with the .gnmap file extension

• XML output (-oX) with the .xml file extension

We can also specify the option (-oA) to save the results in all formats. The command could look like this:

Saving the Results

Copysurajvish@htb[/htb]$ sudo nmap 10.129.2.28 -p- -oA target

Starting Nmap 7.80 ( https://nmap.org ) at 2020-06-16 12:14 CEST
Nmap scan report for 10.129.2.28
Host is up (0.0091s latency).
Not shown: 65525 closed ports
PORT      STATE SERVICE
22/tcp    open  ssh
25/tcp    open  smtp
80/tcp    open  http
MAC Address: DE:AD:00:00:BE:EF (Intel Corporate)

Nmap done: 1 IP address (1 host up) scanned in 10.22 seconds

If no full path is given, the results will be stored in the directory we are currently in. Next, we look at the different formats Nmap has created for us.

Saving the Results

Copysurajvish@htb[/htb]$ ls

target.gnmap target.xml  target.nmap

Normal Output

Saving the Results

Copysurajvish@htb[/htb]$ cat target.nmap

# Nmap 7.80 scan initiated Tue Jun 16 12:14:53 2020 as: nmap -p- -oA target 10.129.2.28
Nmap scan report for 10.129.2.28
Host is up (0.053s latency).
Not shown: 4 closed ports
PORT   STATE SERVICE
22/tcp open  ssh
25/tcp open  smtp
80/tcp open  http
MAC Address: DE:AD:00:00:BE:EF (Intel Corporate)

# Nmap done at Tue Jun 16 12:15:03 2020 -- 1 IP address (1 host up) scanned in 10.22 seconds

Grepable Output

Saving the Results

Copysurajvish@htb[/htb]$ cat target.gnmap

# Nmap 7.80 scan initiated Tue Jun 16 12:14:53 2020 as: nmap -p- -oA target 10.129.2.28
Host: 10.129.2.28 ()	Status: Up
Host: 10.129.2.28 ()	Ports: 22/open/tcp//ssh///, 25/open/tcp//smtp///, 80/open/tcp//http///	Ignored State: closed (4)
# Nmap done at Tue Jun 16 12:14:53 2020 -- 1 IP address (1 host up) scanned in 10.22 seconds

XML Output

Saving the Results

Copysurajvish@htb[/htb]$ cat target.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE nmaprun>
<?xml-stylesheet href="file:///usr/local/bin/../share/nmap/nmap.xsl" type="text/xsl"?>
<!-- Nmap 7.80 scan initiated Tue Jun 16 12:14:53 2020 as: nmap -p- -oA target 10.129.2.28 -->
<nmaprun scanner="nmap" args="nmap -p- -oA target 10.129.2.28" start="12145301719" startstr="Tue Jun 16 12:15:03 2020" version="7.80" xmloutputversion="1.04">
<scaninfo type="syn" protocol="tcp" numservices="65535" services="1-65535"/>
<verbose level="0"/>
<debugging level="0"/>
<host starttime="12145301719" endtime="12150323493"><status state="up" reason="arp-response" reason_ttl="0"/>
<address addr="10.129.2.28" addrtype="ipv4"/>
<address addr="DE:AD:00:00:BE:EF" addrtype="mac" vendor="Intel Corporate"/>
<hostnames>
</hostnames>
<ports><extraports state="closed" count="4">
<extrareasons reason="resets" count="4"/>
</extraports>
<port protocol="tcp" portid="22"><state state="open" reason="syn-ack" reason_ttl="64"/><service name="ssh" method="table" conf="3"/></port>
<port protocol="tcp" portid="25"><state state="open" reason="syn-ack" reason_ttl="64"/><service name="smtp" method="table" conf="3"/></port>
<port protocol="tcp" portid="80"><state state="open" reason="syn-ack" reason_ttl="64"/><service name="http" method="table" conf="3"/></port>
</ports>
<times srtt="52614" rttvar="75640" to="355174"/>
</host>
<runstats><finished time="12150323493" timestr="Tue Jun 16 12:14:53 2020" elapsed="10.22" summary="Nmap done at Tue Jun 16 12:15:03 2020; 1 IP address (1 host up) scanned in 10.22 seconds" exit="success"/><hosts up="1" down="0" total="1"/>
</runstats>
</nmaprun>

---

Style sheets

With the XML output, we can easily create HTML reports that are easy to read, even for non-technical people. This is later very useful for documentation, as it presents our results in a detailed and clear way. To convert the stored results from XML format to HTML, we can use the tool xsltproc.

Saving the Results

Copysurajvish@htb[/htb]$ xsltproc target.xml -o target.html

If we now open the HTML file in our browser, we see a clear and structured presentation of our results.

Nmap Report

More information about the output formats can be found at: https://nmap.org/book/output.html